- Low frequency pure sine wave power inverter is available for sensitive load, accept generator's energy output, high power factor, can run appliances with motors, engines, special light and TV.
- TURBO POWER AUTO DETECTION: when you use some motor, engine, pump, some need 10 times surge power require, in this moment, the IC will auto offer more amp come from the bty with 2 times standby power to turn on the heavy appliance, after turn it on, the amp will come to normal voltage & amp.
- Inside big transformer is made by Taiwan factory, material come from Japan, that's bring the inverter efficiency come maintain to 92% at least. Inside mosfet from Germany, not made in China, that's making sure the inverter for long time use, will be no problem, temperature can stay around 60℃.
- UPS function: a. usual UPS function is build-in bty, only can run about 5 mins. b. however, this inverter can decide how long you want to use, the more high capacity bty you connect, then you can use whatever you want c. Just connect the AC power cord to your home AC source, when out of AC power, the inverter will auto switch to inverter function, this can be your back power.
- Location: USA. For ATS version, please refer to ASIN#B071VFTSKV or this link: https://www.amazon.com/dp/B071VFTSKV
Publisher: POWER JACK
Details: *Specification :
DC Input Voltage: 12V
AC Output Voltage: 110V-120V
Output Wave Form: Pure Sine Wave
Temperature Protection: 70C
Input Low Voltage Alarm: 10.5-11V
Input Low Voltage shutdown: 10V
Input High Voltage Alarm: 15V
Input High Voltage shutdown: >15V
No load current draw when power save on: 0.4-0.5A
No load current draw when power save off: 2.0-2.5A
*Warranty: 1 year (Winthin one month since the customer receive this, if the inverter has problem, just contact me on the details, we can send the parts with free charge only one time. If over one month to one year, the shipping cost for the parts will be paid by the customer, but the parts is free.)
*Note: As this unit could have parts loosing caused during transportation, so please DO check item carefully before testing. If the inverter is damaged by the courier seriously please report this to the courier right away.
*If you only connect battery with load, ac cable unconnected, when you switch to battery charger mode, this means power save mode on, in this moment the condition as follows: The inverter will go to sleeping mode, no load current is 0 AMP, every 3 sec., the inverter will detection itself, after the 3 sec., amp will go to 3 amp (stand by power, time: 1 sec., then back to sleep mode, amp is 0), the inverter will repeat the situation, until you switch to power save off (inverter on, down side)
*If customer needs to use refrigerator, can switch the mode to power save on, as refrigerator only will work every half an hour or one hour , but inverter stay in power save function, no load current is 0 amp, will save power.
*Warning: Inverter must be switched OFF before connecting/disconnecting batteries or AC input/outputs. Failure to do so may result in inverter damage.